Manage waste water without getting your hands dirty
Install, run and maintain SOLOLIFT2
Install, commission and maintain the SOLOLIFT2 lift station in a snap! It sounds like a lot of work, but it’s not! In just two short video modules, you’ll get an overview of how to install, commission and maintain a SOLOLIFT2 unit.
SOLOLIFT2 is specially designed to manage waste water in private homes without having to worry about the location of the existing gravity drainage network. It efficiently removes waste water from bathrooms, utility rooms and kitchens, and maintenance is quick and easy.
The range consists of five variants, all designed to facilitate accessibility and flexibility. The compact design of SOLOLIFT2 makes it ideal for the restoration and remodeling of old homes where space is usually limited.
Installation of SOLOLIFT2
There is a complete step-by-step guide to installing and commissioning SOLOLIFT2 that you can view in just 4 minutes. If you prefer to read the instructions, the module’s hands-on description will guide you from start to finish.
You can now learn to hold SOLOLIFT2 in just 3 minutes, and without getting your hands dirty! Just follow the simple instructions.
With Grundfos, it’s that easy.
Say goodbye to damp basements
If your customers are dealing with wet basements and the discomforts that come with them due to ambient temperature or poor air circulation, just turn to the CONLIFT range of pumps for quick help.
CONLIFT is a condensate extraction pump ideal for pumping condensate collected below the sewer level.
Learn about the pumps that will remove moisture from your customers’ basements.
Conlift
CONLIFT1 lift stations are condensate evacuation pumps suitable for pumping condensate water that accumulates below the level of the sewer or cannot flow to the building’s sewer or drainage system by means of ‘a natural downward slope.
Tool to size the required pump
