PRIMOFIT compression system
Compression splicing resistant to full end loads.
Source: gfps.com
PRIMOFIT is a compression splice made of malleable cast iron that offers full end load capacity. In addition, it allows an angular deviation of up to 3° per compression joint. Suitable for the connection of steel pipes, PE pipes, lead pipes and special steel pipes, PRIMOFIT is available with a black or hot-dip galvanized surface. PRIMOFIT is best suited for new installations, pipe repairs and pipe extensions, as well as valve and filter exchanges.
Fast installation
PRIMOFIT compression fittings are pre-assembled and ready for installation in the pipe. No need to disassemble before installation.
Very versatile connection
PRIMOFIT compression fittings are suitable for different media, pipe materials and pipe diameters and can be easily adapted and reused using replacement packs.
Simple assembly: reduced costs
No special pipe preparation is required for the assembly of PRIMOFIT compression joints. No special tools or skills are required and the joint can be loosened without damaging it.
High quality materials
PRIMOFIT splices are made of high quality white core malleable cast iron. In the case of hot-dip galvanized surfaces, high purity potable zinc is used for galvanizing.
PRIMOFIT installation PE/PE-Xa pipe
PRIMOFIT is a compression joint resistant to full end loads made of malleable cast iron, suitable for the connection of steel, PE and lead pipes with a black or hot-dip galvanized surface.
